48The various settings of the camera are configured by accessing the camera in the web browser. First, access the top pageof the camera (p. 31).For details on entering the user name and password, see p. 31.NoteYou can also access the Setting Page from the CameraManagement Tool. For details, please refer to the “CameraManagement Tool User Manual”.Setting Menu(1) [Admin Viewer]Clicking this button opens Admin Viewer.(2) [Back to top]Clicking this button navigates to the top page.(3) Setting MenuClicking this button navigates to each setting page.Items Common to All Setting Pages Applying New SettingsWhen a setting is changed on any setting page, [Apply]shown on the top right and bottom right of the settingpage turns from grayed-out to blue.Click [Apply] to make the new setting effective.Click [Clear] to restore the previous setting. Setting Changes Requiring RebootingItems that require the camera to be rebooted in order tochange settings are flagged with an orange mark.When any item accompanied by an orange mark ischanged, the [Apply] shown at the top right and bottomright of each setting page changes to [Apply and reboot].Click [Apply and reboot] to confirm the new setting. Thenew setting will be reflected and the camera will berebooted.Click [Clear] to restore the previous setting.Accessing the Setting MenuImportant• To ensure security, exit the web browser after completingsettings on the Setting page and after using Admin Viewer/Admin Tools.• If the factory default administrator password is not changed,the message [The administrator password has not beenchanged. Please change the password.] will appear in theupper portion of the Setting Menu or of each Setting Page.To ensure security, be sure to change the administratorpassword (the message will disappear when the password ischanged).For details on changing the administrator password, pleaserefer to p. 50.(1) (2)(3)ImportantSetting changes will be lost if you navigate to another settingpage without clicking [Apply] or [Apply and reboot]. Be sure toclick [Apply] or [Apply and reboot] to make the new settingseffective.
