68[Maximum Number of Loops]If [Loop] is set under [File Naming], enter themaximum number of loops in the range of 0 to 9999.[User Setting]Images are uploaded according to the file namingmethod specified in [Subdirectory Name to Create]and [File Name to Create].[Subdirectory Name to Create], [File Name toCreate]If file naming is set to [User Setting], enter thesubdirectory name to be created as well as thename of the created file (using up to 127characters). Parameters can be specified in theentry with the “%” character (p. 164).(7) [FTP Upload Test]Clicking [Exec] initiates an upload test based on thesettings currently entered. Only one JPEG image isuploaded. It is not necessary to click [Apply].After entering a password, first click [Exec], then[Apply] the password.E-mail Notification(1) [Notification]Select [Text Only] or [Text with Image] as the contentof notification. If [Upload] is set to [Upload Disabled],[Text with Image] will not be available.(2) [Copy E-mail Settings]Copy the mail settings used in [Maintenance] > [LogNotifications] (p. 88).(3) [Mail Server Name]Enter the host name or IP address of the SMTP server(using up to 63 characters).(4) [Mail Server Port]Enter the port number of the SMTP server (factorydefault setting is [25]).(5) [Sender (From)]Set the e-mail address of the sender (using up to 63characters).(6) [Recipient (To)]Set the e-mail address of the recipient (using up to 63characters).(7) [Authentication]Select [None], [POP before SMTP] or [SMTP-AUTH]for the e-mail authentication method.Set an appropriate method according to theauthentication method used by the SMTP server tosend to.[User Name], [Password], [POP Server]If [POP before SMTP] is selected as the e-mailauthentication mode, enter the user name andpassword as well as the host name or IP address ofthe POP server required for authentication.[User Name], [Password]If [SMTP-AUTH] is selected as the e-mailauthentication method, enter the user name andpassword required for authentication.(8) [Subject]Enter the subject of the e-mail to be sent using up to31 ASCII characters.(9) [Message Body]Enter the message (text) of the e-mail to be sent usingup to 255 ASCII characters. Parameters can bespecified with the “%” character (p. 164).(10)[E-mail Notification Test]Clicking [Exec] initiates an e-mail notification testbased on the settings currently entered. It is notnecessary to click [Apply].After entering a password, first click [Exec], then[Apply] the password.
