Log Viewer1275 Admin Tools Saving a Log to a File/Opening a Saved LogHow to SaveClick [Save to local file] and save using the [Save As]dialog box.How to ViewClick [Open local file] and select a log file using the[Open] dialog box. Copying/Searching LogsHow to CopyClick to select the log you want to copy, and then click[Copy].How to SearchEnter the character string for which you want to search in[Search for] and click [Search].If the searched log is found, it is shown as selected.Click [Previous] or [Next] to search the log above orbelow. Lines of logs found are shown as selected. Showing All LogsSelect the [Show all logs] checkbox.When selected, even logs without a log code are shown if[Not specified] is selected for the log type [Filter]. Showing Filtered LogsYou can filter logs by type, code and date & time to showonly the necessary information.Set the following conditions and click [Apply filter] to showonly the logs matching the specified conditions.[Log Type]Select the [Specify type] or [Specify code] checkbox tofilter logs by type. If you do not want to filter logs by type,select [Not specified].• Specify typeSpecify the log levelSelect [Error], [Warning] or [Information] for the level oflogs to be shown.Specify log output moduleSelect [Application], [HTTP Server] or [System] for theoutput source module whose logs will be displayed.• Specify codeSpecify the log code. Only logs whose code containsthe entered characters are shown. If “A0” is entered,for example, logs starting with “A0” are displayed.[Date & Time]• [Specify start date & time] checkboxWhen this checkbox is selected and a date and timeare entered, logs generated on or after the specifieddate and time are shown.• [Specify end date & time] checkboxWhen this checkbox is selected and a date and timeare entered, logs generated on or before the specifieddate and time are shown.Note[Application], [HTTP Server], and [System] support the List ofLog Messages (p. 168).ImportantLogs saved in the camera's internal memory are cleared whenyou perform [Maintenance] > [Restore Default Settings] and[Reboot], or press the reset switch on the camera.
