96be obtained the moment the Privacy Mask SettingTool is launched.(6) [Control for Admin] buttonDisplays the Control for Admin Panel (p. 133).(7) Registered Privacy Mask Display Area (Capture area)You can check the settings for the area where thecamera can physically capture privacy masks.Even if a panorama image is saved in the camera, itwill not be displayed here.(8) [Registered Privacy Masks]Show the number of registered privacy masks. Youcan set up to eight privacy masks.(9) [Next]When multiple privacy masks are set, clicking thisbutton switches to the privacy mask selected.(10)[Color]Choose the color for the privacy mask area. Allprivacy mask areas are set to the selected color.(11)[Quick adding]Add a privacy mask area and save it in the camera.(12)[Quick change]Change a privacy mask area and save it in thecamera.(13)[Delete]Delete the privacy mask area selected from thecamera.(14)[Image Stabilizer]Show the usage condition of the image stabilizer. Setthe image stabilizer under [Camera] in the Settingpage (p. 58).(15)[Detailed Settings]Show the detailed settings.(15)-1 [Enable privacy mask] checkboxSelect the checkbox if you want to enable theselected privacy mask area settings.(15)-2 [Pan], [Tilt], [Zoom]You can specify values for each camera angle.(15)-3 [Get camera info]Load the current camera angle. Load the pan, tilt,and zoom settings of the camera and show them in(15)-2.(15)-4 [Privacy Mask Position and Size]Set left and upper edge, width, and height of theprivacy mask.(15)-5 [Preview settings]The settings will be reflected in the video displayarea and in the registered privacy mask displayarea (capture area).(16)[Restore settings]Clear the settings you have specified on the screen ofthe tool and restore the settings saved in the camera.(17)[Save settings]Save the privacy mask settings specified under[Detailed Settings] in the camera.Setting the Privacy Mask AreaSet the privacy mask area while checking the image onthe camera.A preview frame showing the privacy mask area isshown in the video display area.If you want to change the size, drag the squaremarkers (■) positioned at the four sides of the previewframe. Drag from inside the frame to move the privacymask area.If you want to cancel the changes and restore thesettings saved in the camera, click [Restore settings].The set privacy mask area is saved in the camera.You can set up to eight privacy masks. Repeat thesetting operations to set multiple privacy mask areas.Saved privacy mask areas are shown in the videodisplay area and registered privacy mask displayarea (capture area).1 If you have not yet obtained the camera controlprivileges, click the [Obtain/Release Camera Control]button and obtain the control privileges.2 Set the position and size of the privacy mask area.3 Click [Quick adding] to save the privacy mask area.4 Confirm privacy mask areas.
