[SSL/TLS] Setting HTTP Communication Encryption81Setting Page4(6) [Display Server Certificate Details]Click [Exec] to view the details of the servercertificate.(7) [Display Self CA Certificate]Used for the purpose of testing SSL communications,but otherwise not normally used.(8) [Backup]Click [Exec] to perform a backup of the certificatesand private key. This operation can only be performedwhen [HTTPS Connection Policy] is set to use [HTTPS]or [HTTP and HTTPS], and SSL communications are inuse.(9) [Restore]Installs the certificates and private key frombackup. Click [Browse] to select the backup file,then click [Exec]. This operation can only beperformed when [HTTPS Connection Policy] is set touse [HTTPS] or [HTTP and HTTPS], and SSLcommunications are in use. The restored certificatewill take effect after rebooting.Encrypted Communications(1) [HTTPS Connection Policy]Select whether or not to use SSL communications withHTTPS connections.To not use SSL communications, select [HTTP].To use SSL communications, select [HTTPS] or [HTTPand HTTPS]. SSL connections will be possible afterrebooting.When [HTTPS] is selected, even HTTP connectionswill be redirected to HTTPS and SSL communicationswill be used.Note• It may take a few minutes to generate an SSL key.• Depending on the type of the certificate being installed on thecamera, a dialog box may appear indicating that the webbrowser has accepted the certificate and a connection can bemade.If the dialog box does not appear, register the CA certificate inthe web browser.Important• Even if SSL communications are set here to be used, they willnot be used if the certificate is not installed.• Video transmission performance will drop, if SSLcommunications are used. When [HTTPS] is selected,communication with RM is not possible.
