144 Changing the Camera Zoom RatioMove the knob on the slider up or down to zoom in or outThe camera zoom ratio will change according to the knobposition on the slider. The knob can also be moved byclicking on an empty part of the slider.Note• If [Digital Zoom] is set to [Enable] in [Camera] on the Settingpage, the icon for the digital zoom telephoto end is displayed.(p. 58).• In the Admin Viewer, you can also control the zoom with theCamera Control button (p. 152). Change the Zoom Ratio in the PanoramaDisplay AreaYou can change the zoom ratio by dragging the yellowframe lines in the panorama window and changing thesize of the frame. The zoom ratio will adjust to capturethe area in the changed frame. Using the Preset/Home PositionYou can control the camera using presets and homeposition registered in the camera beforehand (p. 106).Click the preset selection box and select a preset from thedisplayed list to go to the selected preset camera angle.Click the [Home Position] button to move the cameraangle to the home position.NoteRegister presets and home position beforehand using the PresetSetting Tool (p. 108). Registered presets will appear in the presetselection box. Compensating BacklightThis control is effective when the image is dark due tobacklight.Clicking [BLC] brightens images that are dark due tobacklight.Clicking the button again cancels backlightcompensation.1 Click the [Panorama Display] button.2 Change the zoom ratio in the panorama display areadisplayed.Maximum telephoto digitalzoom(only when digitalzoom is on)Optical telephoto endSlider for zoomMove the knob upwards tozoom in (telephoto)Move the knob downwardsto zoom out (wide-angle)Wide endImportant• The [BLC] button is not available if [Smart Shade Control] isset to [Auto].• The [BLC] button is not available if [Exposure] is set to[Manual].[Home Position] buttonPreset selection box
