162You can set the camera so that the following data is saved automatically to the camera’s memory card. (“Chapter 4 SettingPage”, “[Memory Card] Memory Card Operations and Settings” (p. 84)).When either the storage capacity of the memory card or the number of files that can be saved is reached, you cannot savefurther video to the memory card. If this happens, delete any unneeded video files with the Recorded Video Utility.• Image files when recording-mode stream transmission failed to be sent due to network errors (JPEG only)• Video files when HTTP or FTP upload failed (JPEG/H.264(1))• Video files manually recorded by the user from the Admin Viewer (JPEG/H.264(1))• Video files recorded by [External Device Input], [Volume Detection], and the intelligent functions when an event occurs(JPEG/H.264(1))• Video files recorded using a timer (JPEG/H.264(1))• Log Access to the Memory CardUse the Recorded Video Utility (p. 128) of the Admin Tools or FTP software (not included) to access the camera using thecamera’s IP address.When using FTP software, set [Setting Page] > [Server] > [Use FTP Server] to [Enable].FTP Software SettingsAddress: Camera IP address (factory default setting: 192.168.100.1)User ID: Administrator user ID (factory default setting: root)Password: Administrator password (factory default setting: camera) Directory Structure for Data Downloaded with Recorded Video UtilityWhen video on an memory card is downloaded to a computer with the Recorded Video Utility, folders are createdautomatically in accordance with conditions such as the camera and the date and time.The following shows the folder structure.Example: H.264 video, manually recorded using a camera with an IP address of 192.168.100.1, on Sept. 10, 2015, from16:00:00 to 16:59:59 (Camera Time Zone: GMT+09:00).(1) Folder specified with [Download to](2) IP address of the camera(3) Video recording date(4) Recording start and end times (UTC)(5) Time difference from UTC(6) Recording typeE: EventM: Manual recordingR: Recording-mode streamT: TimerU: Upload(7) Video format (JPEG or H.264)Memory Card AccessImportant• When deleting a video using a method other than the Recorded Video Utility, you must perform [Recreate Video ManagementInformation] under [Memory Card] in the setting page (p. 85).• Canon will assume no liability for any accident or damage resulting from use of FTP software.D:\work \ 192.168.100.1 \ 20150910 \ 070000_075959 _ +9 _ M _ H264(1) (2) (3) (4) (5) (6) (7)
