Intelligent Function Setting Tool1235 Admin ToolsWhen [Change Ratio (%)] is changed, an indicator framerepresenting the percentage of the entire video displayarea is displayed for 1 second in the center of the area,allowing you to check while specifying the setting.Any moving objects detected are shown with contourlines. If it is smaller than [Change Ratio (%)], contour linesare white. If the image is changed for an area larger than[Change Ratio (%)], contour lines take on the same coloras the detection area, indicating that “detected” modehas been triggered to ON.NoteDetection will not be possible for three seconds after the changeratio is modified when camera tampering detection is selected, orwhen switching into camera tampering detection from anotherdetection mode.Detect criteria for [Passing Detection]Set the passing direction and decision point of the movingobject for the detection line that the moving object willcross.[Passing Direction]Select the direction for moving objects to pass thedetection line. When an object that moves in the selecteddirection passes the detection line, “line crossed” isdetected.A preview display shows the selected passing directionon the detection line in the video display area.[Decision Point]Select the decision point of a moving object inaccordance with a detection line. When a decision pointselected here crosses the detection line, “line crossed” isdetected. In the video display area, a cross mark isdisplayed to indicate the decision point in the detectionframe.[Object Size (%)]Enter or use the slider to set the size ratio of movingobjects for the entire screen.When a moving object exceeds the value set for [ObjectSize (%)], it becomes a passing detection target.When [Object Size (%)] is changed, an indicator frameshowing the size of the object is displayed for 1 second inthe center of the video display area, allowing specificationof the settings while checking the size ratio.Change ratio indicatorContour of cameratampering objectDecision pointDetection lineDetection frameObject size indicator
