1234567891011Back NextPreviousTOP4-31Before Using theMachineDocument and PaperCopyingSending and Receiving (MF6595cx/MF6595/MF6590 Only)Printing andScanningNetwork (MF6595cx/MF6595/MF6590/MF6540 Only)Remote UI (MF6595cx/MF6595/MF6590/MF6540 Only)System SettingsMaintenanceTroubleshootingAppendixIndexTable of ContentsChecking and Deleting TX/RX JobsSystem monitor enables you to view the transmission andreception results, monitor the status of the TX/RX jobs currentlybeing processed.Checking Transmission/Reception Results1. Press [System Monitor].2. Press [ ] or [ ] to select , thenpress [OK].If you set to in ,transmission/reception result does not appear in the LCD.3. Press [ ] or [ ] to view the requiredtransmission/reception result.4. Press [Stop] to return to the standby mode.Checking and Deleting Sending/ReceivingDocuments Stored in Memory1. Press [System Monitor].2. Press [ ] or [ ] to select ,then press [OK].3. Press [ ] or [ ] to scroll through the job list.If you want to delete or forward the job, go to step 4. Otherwise,press [Stop] to return to the standby mode.4. Press [ ] or [ ] to select the desired job,then press [OK].If you select a document with the message , TRM...>, or , skip to step 6.5. Press [ ] or [ ] to select or, then press [OK].: Transfers the received document in memory.: Deletes the document.You can select only for the received document inmemory.6. To transfer the document, use the numeric keysto enter a recipient’s number, then press [OK].The machine starts to send the selected document.To delete the document, press [ ] to select.If you do not want to cancel the job, press [ ] to select .7. Press [Stop] to return to the standby mode.
