1234567891011Back NextPreviousTOP10-19Before Using theMachineDocument and PaperCopyingSending and Receiving (MF6595cx/MF6595/MF6590 Only)Printing andScanningNetwork (MF6595cx/MF6595/MF6590/MF6540 Only)Remote UI (MF6595cx/MF6595/MF6590/MF6540 Only)System SettingsMaintenanceTroubleshootingAppendixIndexTable of ContentsGeneral ProblemsThe machine has no power.Is the power cord plugged in securely?Check that the power cord is securely plugged intothe machine and into the wall outlet. If the machine isplugged into a power strip, make sure the power stripis plugged in and turned on.Is the power cord supplying power?Use a different power cord, or test the cord forcontinuity using a voltmeter.Is the main power switch turned on?Turn on the main power switch.QAQAQAThe Error indicator flashes.Does the machine feed paper correctly, or is therepaper in the paper cassette or multi-purpose tray?Clear the paper jam, or load paper in the papercassette or multi-purpose tray. (For instructions onclearing paper jam, see “Clearing Jams,” on p. 10-3.For instructions on loading paper, see “Set Up theMachine,” in the Starter Guide.)If the machine has no paper jam, or paper is loadedin the paper cassette or multi-purpose tray, turn offthe main power switch and wait for more than 10seconds, then turn it on again. If the problem is fixed,the Error indicator will turn off, and the LCD will returnto the standby mode. If the Error indicator remainsflashing, unplug the machine, and contact CanonAuthorized Service Facilities or the Canon CustomerCare Center.QAA