|
1234567891011Back NextPreviousTOP6-6Before Using theMachineDocument and PaperCopyingSending and Receiving (MF6595cx/MF6595/MF6590 Only)Printing andScanningNetwork (MF6595cx/MF6595/MF6590/MF6540 Only)Remote UI (MF6595cx/MF6595/MF6590/MF6540 Only)System SettingsMaintenanceTroubleshootingAppendixIndexTable of ContentsInterface SettingsEthernet DriverYou can specify the communication method and Ethernetconnection type.The default setting is .1. Press [Additional Functions].2. Press [ ] or [ ] to select SETTINGS>, then press [OK].3. Press [ ] or [ ] to select SETTINGS>, then press [OK].4. Press [ ] or [ ] to select DRIVER>, then press [OK].5. Press [ ] or [ ] to select ,then press [OK].6. Press [ ] or [ ] to select the desireddetection method, then press [OK].: Automatically determines the communication mode (Halfduplex/Full duplex) and Ethernet type (10Base-T/100BaseTX). Skip tostep 11.: You have to manually specify the communication modeand Ethernet type.If you reconnect the network cable (for example, reconnect the cableto a different Ethernet hub) with the power on, the Auto Detectfunction will not work even if you set to .(Connect the cable with the power off.)7. If you have selected in step 6, press[ ] or [ ] to select , then press[OK].8. Press [ ] or [ ] to select the desiredcommunication method, then press [OK].: Sends and receives alternately.: Sends and receives simultaneously.9. Press [ ] or [ ] to select ,then press [OK]. PreviousNext |