| 
1234567891011Back NextPreviousTOP4-21Before Using theMachineDocument and PaperCopyingSending and Receiving (MF6595cx/MF6595/MF6590 Only)Printing andScanningNetwork (MF6595cx/MF6595/MF6590/MF6540 Only)Remote UI (MF6595cx/MF6595/MF6590/MF6540 Only)System SettingsMaintenanceTroubleshootingAppendixIndexTable of ContentsRedialing AutomaticallyThe default settings are as follows:AUTO REDIAL: REDIAL TIMES: <2TIMES>REDIAL INTERVAL: <2MIN.>1. Press [Additional Functions].2. Press [ ] or [ ] to select ,then press [OK].3. Press [ ] or [ ] to select ,then press [OK].4. Press [ ] or [ ] to select ,then press [OK].5. Press [ ] or [ ] to select , then press[OK].6. Press [ ] or [ ] to select ,then press [OK].7. Use [ ] or [ ], or the numeric keys to enterthe number of redials the machine will make,then press [OK].8. Press [ ] or [ ] to select INTERVAL>, then press [OK].9. Use [ ] or [ ], or the numeric keys to enterthe time (in minutes) between redials, thenpress [OK].–––10. Press [ ] or [ ] to select REDIAL>, then press [OK].11. Press [ ] or [ ] to select or ,then [OK].: Resends all documents once if final transmission made byautomatic redialing is interrupted.: Does not redial when final transmission is interrupted.12. Press [Stop] to return to the standby mode.Checking Dialing LineChecking dialing line function enables you to configure the settingon whether to check for a dial tone.The default setting is .1. Press [Additional Functions].2. Press [ ] or [ ] to select ,then press [OK].3. Press [ ] or [ ] to select ,then press [OK].4. Press [ ] or [ ] to select CHCK>, then press [OK].5. Press [ ] or [ ] to select , then press[OK].6. Press [Stop] to return to the standby mode. |
