1234567891011Back NextPreviousTOP4-13Before Using theMachineDocument and PaperCopyingSending and Receiving (MF6595cx/MF6595/MF6590 Only)Printing andScanningNetwork (MF6595cx/MF6595/MF6590/MF6540 Only)Remote UI (MF6595cx/MF6595/MF6590/MF6540 Only)System SettingsMaintenanceTroubleshootingAppendixIndexTable of ContentsSpecifying RecipientsFollow the procedure below to send documents to registeredrecipients.Using One-Touch Speed Dialing Keys/Group DialingTo use this feature, you must register recipients in one touch speed dialingkeys beforehand. (See “Storing/Editing Address Book,” on p. 4-6.)1. Set documents.Place the first page on the platen glass if you are not using the ADF.2. Press [FAX].If you want to adjust the image quality and density, see “ScanSettings,” on p. 4-5.3. Press the desired one-touch speed dialing keys(01 to 23).If you pressed a wrong key, press [Clear] and try again.[ 0 5 ] C A N O N U S AEx.T E L = 0 1 2 3 X X X X X X4. Press [Start].When you set the documents on the platen glass, press [ ] or [ ]to select the document size, then press [Start] for each document.When scanning is complete, press [OK] to start dialing.Using Coded Speed Dialing Codes/GroupDialingYou can specify up to 100 recipients using coded speed dialingcodes.To use this feature, you must register recipients in coded speed dialingcodes beforehand. (See “Storing/Editing Address Book,” on p. 4-6.)1. Set documents.Place the first page on the platen glass if you are not using the ADF.2. Press [FAX].If you want to adjust the image quality and density, see “ScanSettings,” on p. 4-5.3. Press [Coded Dial].4. Enter the desired two-digit code (00 to 99) withthe numeric keys.[ * 0 1 ] C A N O NEx.T E L = 0 1 2 X X X X X X XIf you entered a wrong code, press [Clear], then try again from step 3.5. Press [Start].When you set the documents on the platen glass, press [ ] or [ ]to select the document size, then press [Start] for each document.When scanning is complete, press [OK] to start dialing.
