1234567891011Back NextPreviousTOP4-16Before Using theMachineDocument and PaperCopyingSending and Receiving (MF6595cx/MF6595/MF6590 Only)Printing andScanningNetwork (MF6595cx/MF6595/MF6590/MF6540 Only)Remote UI (MF6595cx/MF6595/MF6590/MF6540 Only)System SettingsMaintenanceTroubleshootingAppendixIndexTable of ContentsDirect SendingWith direct sending, the machine sends the document onthe ADF as it scans one page, without storing all pages intomemory at once. You can send a document ahead of otherdocuments stored in memory.You cannot use the platen glass for direct sending.You cannot use group dialing for direct sending.With direct sending, the machine scans one page into memory at onceand sends it right away.Therefore, when is displayed, even if you have selecteddirect sending, wait until there is enough space in memory to scan onepage, or delete the documents in memory, and try again. (See “Checkingand Deleting Sending/Receiving Documents Stored in Memory,” onp. 4-31.)1. Load the document in the ADF.2. Press [FAX].3. Press [Direct TX].To cancel direct sending, press [Direct TX] again.If you want to adjust the image quality and density, see “ScanSettings,” on p. 4-5.–––4. Dial the recipient’s fax/telephone number.If you select delayed transmission or sequential broadcasting,memory sending is automatically selected.5. Press [Start].Each page is sent as it is scanned.During transmission, and the recipient’sfax/telephone number alternately appear as messages on the LCDdisplay.