1234567891011Back NextPreviousTOP10-9Before Using theMachineDocument and PaperCopyingSending and Receiving (MF6595cx/MF6595/MF6590 Only)Printing andScanningNetwork (MF6595cx/MF6595/MF6590/MF6540 Only)Remote UI (MF6595cx/MF6595/MF6590/MF6540 Only)System SettingsMaintenanceTroubleshootingAppendixIndexTable of ContentsLCD MessagesSee the following when the LCD displays error and statusmessages.ADJUSTING WAITING TO SCANDescription The machine is not ready for scanning.Action Wait until the machine is ready.AUTO REDIALDescription This message appears when the recipient isengaged in direct sending and the job is waiting.Action Disappears when the transmission restarts.CHANGE PAPERSIZEDescription The size of the paper in the paper cassette ormultipurpose tray is different from that of thepaper specified in or TRAY STD SET> in the menu.Action Load the paper which size is shown on thelower line of the LCD display. Or change thepaper size setting. Then reset the machine byopening the left cover and then closing it.If you are trying to print a report or list, set thepaper size to or , then load paperof the same size.––CHANGE REG’D SIZE→ COMMON SETTINGSDescription This message appears at the same time when is shown. You may not print atthe current paper size.Action Change paper on the paper cassette or multi-purpose tray. And you must also change the sizesetting in the menu.CHECK DOCUMENTDescription A document jam may have occurred in the ADF.Action Remove the jammed document.CLOSE COVERDescription A cover is open.Action Close the cover shown on the lower line of theLCD display.DATA ERRORDescription The machine may have trouble.Action Contact Canon Customer Care Center.
