1234567891011BackNextPreviousTOP4-20Before Using theMachineDocument and PaperCopyingSending and Receiving (MF6595cx/MF6595/MF6590 Only)Printing andScanningNetwork (MF6595cx/MF6595/MF6590/MF6540 Only)Remote UI (MF6595cx/MF6595/MF6590/MF6540 Only)System SettingsMaintenanceTroubleshootingAppendixIndexTable of ContentsFax Dialing FeaturesSwitching Temporarily to Tone DialingIf your machine is set for pulse dialing, use the procedure below toswitch to tone dialing to use information services (e.g., banks, airlinereservations, and hotel reservations).To talk to the other party, you will need to connect an external telephoneto the machine.1.Press [FAX].2.Press [Hook].Make sure to confirm the dial tone before entering a fax number. Ifyou enter the number before the dial tone can be heard, the call maynot be connected, or the wrong number may be dialed.3.Use the numeric keys to dial the requiredinformation service.4.When the recorded message of the informationservice answers, press [Tone] to switch to tonedialing.5.Use the numeric keys to enter the numbersrequested by the information service.6.If you want to receive faxes, press [Start].7.When finished, press [Hook] to disconnect thecall.Tone dialing is canceled when you disconnect the call.RedialingRedialing can be done manually or automatically. For automaticredialing, you can set how many times the machine redials and thetime between redials.Redialing Manually1.Set documents.Place the first page on the platen glass if you are not using the ADF.2.Press [FAX].3.Press [Redial] to dial the last number youentered using the numeric keys.To cancel manual redialing, press [Reset].4.Press [Start].When you set the documents on the platen glass, press [] or []to select the document size, then press [Start] for each document.When scanning is complete, press [OK] to start dialing.When
