1234567891011Back NextPreviousTOP6-8Before Using theMachineDocument and PaperCopyingSending and Receiving (MF6595cx/MF6595/MF6590 Only)Printing andScanningNetwork (MF6595cx/MF6595/MF6590/MF6540 Only)Remote UI (MF6595cx/MF6595/MF6590/MF6540 Only)System SettingsMaintenanceTroubleshootingAppendixIndexTable of Contents3. Press [ ] or [ ] to select SETTINGS>, then press [OK].4. Press [ ] or [ ] to select ,then press [OK].5. Press [ ] or [ ] to select press [OK].6. Press [ ] or [ ] to select or ,then press [OK].: When you set or browse each item of the machine with utilitythat uses SNMP to obtain information.: When you do not use an SNMP utility. Skip to step 8.If you want to use a Canon printer driver or utility, select for both You can restrict the IP addresses of computers on which itemscan be set or browsed. If you restrict the IP addresses, it isnot possible to use the Remote UI to set or browse detailedinformation on computers other than those whose IP addressesare allowed, even if both are . For details, see “IP Address Range Settings,” on p. 6-16.7. Use [ ], [ ], or the numeric keys to changethe port number, then press [OK].8. Press [ ] or [ ] to select NAME 1>, then press [OK].––9. Use the numeric keys to enter the desiredcommunity name other than “public,” then press[OK].10. If you need to specify 2>, press [ ] or [ ] to select NAME 2>, then press [OK].If you need not specify , skip to step 12.11. Use the numeric keys to enter the desiredcommunity name, then press [OK].12. Press [ ] or [ ] to select 1>, then press [OK].13. Press [ ] or [ ] to select , then press[OK].14. Press [ ] or [ ] to select 2>, then press [OK].If you need not specify , skip to step 16.15. Press [ ] or [ ] to select , then press[OK].16. Press [Stop] to return to the standby mode.17. Restart the machine.
