|
1234567891011Back NextPreviousTOP10-26Before Using theMachineDocument and PaperCopyingSending and Receiving (MF6595cx/MF6595/MF6590 Only)Printing andScanningNetwork (MF6595cx/MF6595/MF6590/MF6540 Only)Remote UI (MF6595cx/MF6595/MF6590/MF6540 Only)System SettingsMaintenanceTroubleshootingAppendixIndexTable of ContentsErrors occur frequently while sending.Are the telephone lines in poor condition, or doyou have a bad connection?Check if there is a device nearby that interferes withsignal transmission (e.g., microwave oven).Lower the transmission speed. (See “TX START SPEED,”on p. 11-37.)QAAReceiving ProblemsCannot receive a fax automatically.Is the machine set to receive automatically?For the machine to receive faxes automatically, thereceive mode must be set to , ,, or . If you have set ,confirm that an external telephone with built inanswering machine is connected to the machineand that it is turned on with an outgoing messageproperly recorded. (See “Basic Receiving Method,” onp. 4-23.)Are documents stored in memory, leaving little orno memory available?Print, send, or delete any documents stored inmemory.Has an error occurred during reception?Check the LCD for an error message. (See “LCDMessages,” on p. 10-9.)Print an Activity Report and check for an error. (See“ACTIVITY REPORT,” on p. 11-43.)QAQAQAA PreviousNext |