Canon imageRunner 1025 Basic Operation Manual

Also see for imageRUNNER 1025: Manual Brochure & specs

Contents

Copying4-212-Sided Copying2 to 2-Sided Copying2 to 2-Sided CopyingYou can make two-sided copies from two-sided originals.1 Set originals.For details, see “Placing Originals,” on p. 2-4.2 Press [COPY].3 Press [2-Sided].4 Press [ ] or [ ] to select <2> 2-SIDED>, then press [OK].2 > 2 - S I D E DT W O - S I D E D5 Press [ ] or [ ] to select TYPE> or (for theorigianals), then press [OK].B O O K T Y P ET Y P E O F O R I G I N A L: The front and back sides of theoriginal have the same top-bottom orientation.: The front and back sides ofthe original have opposite top-bottomorientations.6 Press [ ] or [ ] to select TYPE> or (for thecopies), then press [OK].B O O K T Y P ET Y P E O F O U T P U T: The front and back sides of thecopy will have the same top-bottom orientation.: The front and back sides ofthe copy will have opposite top-bottomorientations.7 Enter the desired copy quantity (1 to 99)using – [numeric keys].A T E X T1 0 0 % * L T R 0 18 Press [Start].If you want to copy multiple originals using theplaten glass, set an original and press [Start]for each original, once for each page.To cancel all settings, press [Reset].When you set the original on the platen glass,press [Start] for each document. Whenscanning is complete, press [OK].You can skip steps 5 and 6. In this case, themachine scans two-sided originals in the orientation and outputs thesame way.If you press [Start] in step 5 after selected, the machine scans two-sided documents in the orientation and outputs the same way.––––