Canon imageRunner 1025 Basic Operation Manual

Also see for imageRUNNER 1025: Manual Brochure & specs

Contents

14-10Machine SettingsSettings MenuSetting Item Description Applicable Page2. RECEIVE REDUCTION Sets whether the received images print out at a reduced size. e-Manual“Fax”, “I-Fax”, “E-Mail”, “ScanningDocuments to a FileServer”ON Image reduction is turned on.1. RXREDUCTIONSelects the reducing type.AUTOFIXED REDUCTION (90%, 95%, 97%, 75%)––2. REDUCEDIRECTIONSelects the reducing direction.VERTICAL ONLYHORIZ & VERTICAL––OFF Image reduction is turned off.3. CONT. PRINTING Selects how the machine responds when the PREPARE NEW TONER> message appears.e-Manual“Fax”, “I-Fax”RX TO MEMORY The machine stores all documents in memory.KEEP PRINTING The machine does not store documents in memory if the tonerruns out. Reset to after replacing the tonercartridge.2. FAX SETTINGS Sets the fax features. -1. USER SETTINGS Specifies the basic operation settings in the fax mode.1. UNIT TELEPHONE # Registers your fax number (20 characters maximum, includingspaces).Quick Start Guide“Register UserTelephone Numberand Unit Name”2. TEL LINE TYPE Selects the telephone line type.TOUCH TONEROTARY PULSE––Quick Start Guide“Select the ReceiveMode that SuitsYour Needs”3. OFFHOOK ALARM Sets whether the alarm sounds when the handset of theexternal telephone is off the hook.ONOFF––-4. VOLUME CONTROL Adjusts the monitor volume and the calling volume.1. MONITOR VOL.CTRLSets the volume for monitor tone during the fax transmission.(0-3)2. CALLINGVOLUMESet the volume of the ring produced when the machine detectsa call. (1-3)2. TX SETTINGS Sets the transmission features. p. 5-451. ECM TX Sets whether the ECM (Error Correction Mode) transmission isactivated.ONOFF––p. 5-452. PAUSE TIME Sets the pause time when you insert pause into the dialingsequence. (1SEC–15SEC)p. 5-16