Canon imageRunner 1025 Basic Operation Manual

Also see for imageRUNNER 1025: Manual Brochure & specs

Contents

14-29Machine SettingsSettings MenuSetting Item Description Applicable Page3. POP Sets whether to receive e-mail/l-faxes using a POP server.OFFON––e-Manual“Network Settings”4. E-MAIL ADDRESS Enters the e-mail address your machine will use (64 charactersmaximum).5. POP SERVER Enters the POP server IP address or name (48 charactersmaximum).6. POP ADDRESS Enters the login name for access to the POP server (32characters maximum).7. POP PASSWORD Enters the password for access to the POP server (32 charactersmaximum).8. POP INTERVAL Sets the interval you want the POP server to check for incominge-mail. If the interval is set to 0, the POP server is not checkedautomatically (0MIN.–99MIN.).9. AUTH/ENC SETTINGS Specifies authenticating method before sending e-mail.1. POP BEFORESEND.Sets whether to use the SMTP server requires POP before SMTP(method for authenticating users who have logged in the POPserver before sending e-mail).OFFON––2. SMTP AUTH Sets whether to use the SMTP server requires SMTPAuthentication (method for authenticating users who havelogged in the POP server before sending e-mail).OFFON––8. STARTUP TIME SET. Sets the time period required to delay the startup of networkcommunications for the machine (0–300SEC).6. COMMUNICATIONS*2 Sets the fax, e-mail, and I-fax communication. e-Manual“Fax”, “I-Fax”, “E-Mail”1. E-MAIL/I-FAX Sets the e-mail/I-fax communications.1. MAX TX DATA SIZE Sets the maximum data size for outgoing e-mail messages andI-fax documents. If the e-mail message exceeds this data sizelimit, it is split up into several e-mail messages before beingsent. However, if an I-fax transmission exceeds the data sizelimit, it is handled as an error, and it is not sent. (0 to 99 MB)2. DIVIDED OVER MAX Sets whether to divide a document into separate files when it issent if its size exceeds the data size you specify.OFFON––2. FAX SETTINGS Sets the facsimile communication.1. TX START SPEED Sets the transmission start speed for faxes. (33600bps, 2400bps,4800bps, 7200bps, 9600bps, 14400bps)2. RX START SPEED Sets the reception start speed for faxes. (33600bps, 2400bps,4800bps, 7200bps, 9600bps, 14400bps)