Canon imageRunner 1025 Basic Operation Manual

Also see for imageRUNNER 1025: Manual Brochure & specs

Contents

Fax (imageRUNNER 1025iF Only)5-21Specifying DestinationsSpecifying DestinationsThis section describes how to specify a fax or I-fax destination. You can select a destinationstored in the Address Book or a one-touch key, a coded dial code, or specify a newdestination.Using Numeric KeysUsing Numeric KeysYou can specify a new fax number, or I-fax address using – , , [numeric keys].1 Place the original on the platen glass orload it in the ADF.2 Press [SEND].3 Press [ ] or [ ] to select or FAX>, then press [OK].F A XS E L E C T S E N D M E T H O D4 Enter the fax number or I-fax addressusing – , and [numeric keys],then press [OK].= 0 1 2 X X X X X X XF A X N U M B E REx.If you enter a wrong number whenspecifying a fax number:Go back to the wrong digit with [ ].If you enter a wrong character whenspecifying an I-fax address:Go back to the wrong character with [ ],then press [Clear]. Or press and hold[Clear] to delete the entire entry.If you specify an I-fax address:You can enter the optional settings bypressing [OK]. (See“Send Settings,” on p. 5-43.)= j o h n @ i f a x . c o mA D D R E S S : aEx.If in in is set to and youspecify a fax number using – [numeric keys],you must enter the fax number again forconfi rmation. Enter the same fax number youentered in step 4, then press [OK].5 Press [Start].If the message appears, press[ ] or [ ] to select the original size, thenpress [Start] for each original. When scanningis complete, press [OK] to start dialing.You can also adjust the following scan settings asnecessary, using the keys on the operation panel,after specifying the destination in step 4.Image Qaulity: See “Selecting Image Quality,” onp. 5-29.Density: See “Adjusting Density,” on p. 5-30.2-Sided: See “2-Sided Originals,” on p. 5-31.–––