Canon imageRunner 1025 Basic Operation Manual

Also see for imageRUNNER 1025: Manual Brochure & specs

Contents

Originals and Print Media2-2Originals RequirementsOriginals RequirementsAvailable original type, size, weight and quantity are shown in the table below.Platen Glass ADFType Plain paperThick originalsPhotographsSmall originals (e.g., index cards)Special types of paper (e.g., tracingpaper*1 , transparencies*1, etc.)Books (Depth: 7/8" (20 mm)maximum)––––––Plain paper (Multiple pages of originals of thesame size, thickness and weight or one-pageoriginals.)Size (W × L) 8 1/2" × 14" maximum(216 × 356 mm maximum)8 1/2" × 14" maximum (216 × 356 mmmaximum)5 1/2" × 5" minimum (139.7 × 128 mmminimum)Weight 4.4 lb (2 kg) maximum One-sided scanning (1 page): 13 to 34 lb bond(50 to 128 g/m2)Two-sided scanning: 13 to 28 lb bond (50 to105 g/m2 )Quantity 1 sheet 50 sheets maximum*2(25 sheets maximum for LGL originals)*1 When copying transparent originals such as tracing paper or transparencies, use a piece of plain white paper to cover theoriginal after placing it face-down on the platen glass.*2 21 lb bond (80 g/m2) paperDo not place the originals on the platen glass or in the ADF until the glue, ink or correction fluid on theoriginals are completely dry.Remove all fasteners (staples, paper clips, etc.) before loading the originals in the ADF.To prevent original jams in the feeder, do not use any of the following:Wrinkled or creased paperCarbon paper or carbon-backed paperCurled or rolled paperCoated paperTorn paperOnion skin or thin paperPaper printed with a thermal transfer printerTransparencies••••••••