Canon imageRunner 1025 Basic Operation Manual

Also see for imageRUNNER 1025: Manual Brochure & specs

Contents

13-8TroubleshootingError MessagesMessage Description ActionLOAD PAPER No paper is loaded in the paperdrawer or stack bypass, or notinserted correctly.Insert the paper drawer as far as it will goor load paper.MEM IN USE nn% This message shows the percentageof the memory currently in use. Thismessage is displayed when you setthe document in the ADF to send afax.If you need more space, wait for themachine to send any documents inmemory. Also print, send, or delete anydocuments stored in memory.MEMORY FULL The machine is full of jobs.– Print, send, or delete any documentsstored in memory.Divide the document stack or data intoa few parts and try again one by one.Send the document with lowresolution.When this message appears duringusing the ADF, the scanning documentstops halfway. In this case, clear thepaper jam from the ADF.––––The number of TX/RX jobs that canbe stored in memory reached themaximum.– The maximum numbers of jobs thatcan be stored in memory are as follows(Based on the condition that the otherparty sends the fax by the imageRUNNER 1025iF with ITU-T No.1 Chartstandard mode);Up to 70 jobs for sending or 90 jobsfor receiving, or 95 fax jobs includingsending and receiving jobs.Wait for the machine to send anydocuments in memory. Also print,send, or delete any documents storedin memory.–NO APPROPRIATE SIZE Although is set to in in the menu,appropriate size paper is not set inthe paper drawer or stack bypass.Select the paper size, or set the copyratio.NOT AVAILABLE NOW You pressed the one-touch key orcoded dial code that has alreadybeen registered, when you areregistering favorites buttons, one-touch keys, coded dial codes, orgroup addresses.– Register the one-touch key or codeddial code that is not used.–You have specified the groupdialing when the line is off thehook.– Specify the recipient other than groupdialing.–