Specifying the Ink Drying Time for RollsSpecifying the Ink Drying Time for RollsWhen you are using paper that takes longer for ink to adhere, ink may be transferred onto the paper surface duringejection, soiling it. In that case, you may be able to improve the condition by setting the time to wait for the ink todry after printing.Note• If the Cutter touches the print surface on which the ink is not dry, the paper surface may become scratched orsoiled, or the paper surface may rub when the paper falls and the surface may become soiled.To wait for the ink to dry without allowing printed documents to fall after printing, set Cutting Mode on the menu ofthe printer to Eject. (See "Specifying the Cutting Method for Rolls.") ➔ P.349• The settings can also be made from the Control Panel on the printer. Select the type of paper from Paper Detailsin Paper Menu. (See "Menu Settings.") ➔ P.414Windows1 Display the printer driver dialog box.(See "Accessing the Printer Driver Dialog Box from the Operating System Menu (Windows).") ➔P.1492 Select the Main sheet and click C Advanced Set-tings in A Media Type.3 In the Paper Detailed Settings dialog box displayednext, select the desired settings values in B Be-tween Pages and C Between Scans in A DryingTime, and then click OK.(See "Paper Detailed Settings Dialog Box (Win-dows).") ➔P.154Mac OS1 Choose Print in the application menu.Specifying the Ink Drying Time for Rolls iPF780User's GuideHandling and Use of Paper Handling rolls348
