10 Select the B Borderless Printing check box to dis-play the Information dialog box.11 Select the width of the loaded roll in the Roll Paper Width list—in this case, click 10-in. Roll (254.0mm).12 Click OK to close the Information dialog box.13 In C Borderless Printing Method, make sure E Scale to fit Roll Paper Width is selected.14 Confirm the print settings and print as desired.Note• For tips on confirming print settings, see "Confirming Print Settings ." ➔ P.145Borderless Printing by Resizing Originals to Fit the Roll Width (Mac OS)Borderless Printing by Resizing Originals to Fit the Roll Width (Mac OS)This topic describes how to enlarge originals before borderless printing to match the roll width, based on the follow-ing example.Important• When borderless printing is used, the edge of the paper is cut during printing. Thus, ink density may be uneven atthe edges. If you require higher image quality, select No from the Automatic Cutting list in the Paper DetailedSettings dialog box. In this case, the paper can be printed without borders on the left and right sides only. Onceprinted and cut, please cut the upper and lower bands with scissors.• Document: Any type• Page size: A4 (210.0×297.0 mm)/Letter (8.3 × 11.7 in)• Paper: Roll• Paper type: Canon Heavyweight Coated Paper• Roll paper width: 10 inches (254.0 mm)iPF780 Borderless Printing by Resizing Originals to Fit the Roll Width (Mac OS)User's GuideEnhanced Printing Options Borderless Printing85
