Cause Corrective ActionThe roll is empty. 1. Press the Release Lever back and remove the roll.(See "Removing the Roll from the Printer.") ➔ P.343(See "Removing the Roll Holder from Rolls.") ➔ P.3452. Load the new roll.(See "Attaching the Roll Holder to Rolls.") ➔ P.336(See "Loading Rolls in the Printer.") ➔ P.3393. If no barcode was printed on the roll, specify the type of paper.(See "Changing the Type of Paper.") ➔ P.3414. When you have selected ManageRemainRoll > On in the control panel menu and a barcode is not printedon the roll, also specify the paper length.(See "Specifying the Paper Length.") ➔ P.3435. If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen, press theOK button.Printing will resume, starting from the page on which the error occurred.If no message appears, printing will continue from the next page.There is remainingroll paper, but be-cause it could notbe advanced, itcould not be detec-ted.The unused portion of the roll is heavy, and this is placing a burden on the printer. It may be helpful to changethe printing mode, which will change the paper feed timing.Choose a higher level of Print Quality in the Advanced Settings of the printer driver.(See "Giving Priority to Particular Graphic Elements and Colors for Printing.") ➔ P.54Sheet printing is selected.Sheet printing is selected.Cause Corrective ActionYou have attempted to print on a sheet, butno sheet is loaded.Press ▲ or ▼ to select Load Paper, and then press the OK button. Load a sheet,and then print.(See "Loading and Printing on Sheets.") ➔ P.21Press ▲ or ▼ and select Stop Printing or press the Stop button to stop printing.Regular printing is selected, but a roll is loaded.Regular printing is selected, but a roll is loaded.Cause Corrective ActionA print job for printing onsheets was sent when a roll isloaded.1. Press ▲ or ▼ to select Remove Roll Paper, and then press the OK button to stop printing.2. After removing the roll, load and print on a sheet of the type and size of paper you have speci-fied in the printer driver.(See "Removing the Roll from the Printer.") ➔ P.343(See "Loading and Printing on Sheets.") ➔ P.21Press ▲ or ▼ to select Stop Printing, and then press the OK button to stop printing.Paper jamPaper jamCause Corrective ActionA paper jam oc-curred in theprinter duringprinting.For roll paper, cut the paper on the upper side of the {Paper Feed Slot.1. Push the Release Lever back and remove the jammed paper.(See "Clearing Jammed Roll Paper.") ➔ P.527(See "Clearing a Jammed Sheet.") ➔ P.5302. Load the paper.(See "Loading Rolls in the Printer.") ➔ P.339(See "Loading Sheets in the Printer.") ➔ P.3563. Pull the Release Lever forward.4. If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen, press the OKbutton.Printing will resume, starting from the page on which the error occurred.Sheet printing is selected. iPF780User's GuideError Message Messages regarding paper560
