UNIT:Letter Sheet Counters for maintenance purposes. Needed when service isrequested.Printing Interface Setting ReportsPrinting Interface Setting ReportsYou can print an Interface Print report indicating the current interface settings values of the printer.Printing Interface Print reports1 Load the paper.If using sheets, load paper A4/Letter-sized, you will need at least three sheets.2 On the Tab Selection screen of the Control Panel, press ◀ or ▶ toselect the Settings/Adj. tab ( ).Note• If the Tab Selection screen is not displayed, press the Menu button.3 Press the OK button.The Set./Adj. Menu is displayed.4 Press ▲ or ▼ to select Test Print, and then press the OK button.5 Press ▲ or ▼ to select Interface Print, and then press the OK button.Confirming Interface Print informationThe following information is included in the Interface Print report.Canon imagePROGRAF iPFxxxx Interface Print Printer modelFirm Firmware VersionBoot Boot ROM VersionMIT(DBF) MIT Database Format VersionMIT(DB) MIT Database VersionS/N Printer serial numberDate The date when the interface setup print reportwas printed.EOP Timer Specify the timeout period before cancellation ofprint jobs that cannot be received by the printer.TCP/IPv4 Frame Type IPv4 settings values.Use DHCPUse BOOTPUse RARPEnable DNS Dynamic UpdateUse Zeroconf FunctionIP AddressSubnet MaskPrinting Interface Setting Reports iPF780User's GuideControl Panel Printer Menu426
