Paper to PrepareWhen Using Rolls An unused roll at least 10 inches wideWhen Using Sheets Auto(Standard) : One sheet of unused paper of at least A4/Letter sizeAuto(Advanced): Six sheets of unused paper of at least A4/Letter size (or one sheet when using A2 or larg-er)Perform adjustment as follows.1 Load the paper.• Attaching the Roll Holder to Rolls ➔P.336• Loading Rolls in the Printer ➔P.339• Loading Sheets in the Printer ➔P.356Important• Always make sure the loaded paper matches the type of paper specified on the printer. Adjustmentcannot be completed correctly unless the loaded paper matches the settings.2 On the Tab Selection screen of the Control Panel, press ◀ or ▶ toselect the Settings/Adj. tab ( ).Note• If the Tab Selection screen is not displayed, press the Menu button.3 Press the OK button.The Set./Adj. Menu is displayed.4 Press ▲ or ▼ to select Adjust Printer, and then press the OK button.5 Press ▲ or ▼ to select Head Posi. Adj., and then press the OK button.6 Press ▲ or ▼ to select Auto(Standard) or Auto(Advanced), and then press the OK button.A test pattern is printed for adjustment.Adjustment is now finished if you have printed on a roll or a sheet of A2 size or larger.7 If you are printing on sheets smaller than A2 size for Auto(Advanced), a confirmation message is dis-played requesting you to continue printing. Press the OK button and follow the instructions displayed.Manual Adjustment to Straighten Lines and ColorsManual Adjustment to Straighten Lines and ColorsIf printed vertical lines are warped or colors are out of alignment, execute Head Posi. Adj. to adjust the Printheadalignment.Normally, execute Standard.(See "Automatic Adjustment to Straighten Lines and Colors.") ➔P.476However, when printing on special paper, or if printing is not improved after Standard, try Manual.Manual adjustment requires you to examine the printed test pattern and enter an adjustment value.iPF780 Manual Adjustment to Straighten Lines and ColorsUser's GuideAdjustments for Better Print Quality Adjusting the Printhead477
