9 In the A Page Size list, click the size of the original as specified in the application. In this case, click ISOA4.10 Select the C Enlarged/Reduced Printing check box.11 Click ISO A4 in the G Paper Size list.12 Click F Scaling and enter 120.Note• You can specify enlargement that exceeds the paper size, but in this case, the portions off the bottom andright edges of the paper will not be printed.• If the original size after enlargement or reduction issmaller than the paper size, the original is printed inthe upper-left corner. In this case, you can centeroriginals by selecting E Print Centered on the Lay-out sheet.13 Confirm the print settings and print as desired.Note• For tips on confirming print settings, see "Confirming Print Settings ." ➔ P.145Resizing Originals by Entering a Scaling Value (Mac OS)Resizing Originals by Entering a Scaling Value (Mac OS)This topic describes how to enlarge originals before printing by entering a scaling value, based on the followingexample.• Document: Any Type• Page size: A4 (210.0 × 297.0 mm [8.3 × 11.7 in])• Paper: Roll paper• Paper type: Plain Paper• Roll paper width: A2/A3 roll (420.0 mm [16.5 in])iPF780 Resizing Originals by Entering a Scaling Value (Mac OS)User's GuideEnhanced Printing Options Printing enlargements or reductions67
