7 Click the Page Setup tab to display the Page Setupsheet.8 In the A Page Size list, click the size of the original as specified in the source application. In this case, click10"x12".9 Select and click a roll paper in the L Paper Source list.10 Select the B Borderless Printing check box to dis-play the Information dialog box.11 Select the width of the loaded roll in the Roll Paper Width list—in this case, click 10-in. Roll (254.0mm).12 Click OK to close the Information dialog box.13 In C Borderless Printing Method, click F Print Image with Actual Size.14 Confirm the print settings and print as desired.Note• For tips on confirming print settings, see "Confirming Print Settings ." ➔ P.145Borderless Printing at Actual Size (Mac OS)Borderless Printing at Actual Size (Mac OS)This topic describes how to print borderlessly at actual size based on the following example.Important• When borderless printing is used, the edge of the paper is cut during printing. Thus, ink density may be uneven atthe edges. If you require higher image quality, select No from the Automatic Cutting list in the Paper DetailedSettings dialog box. In this case, the paper can be printed without borders on the left and right sides only. Onceprinted and cut, please cut the upper and lower bands with scissors.• Document: Any type• Page size: 10 × 12 inches (254.0×304.8 mm)–BorderlessBorderless Printing at Actual Size (Mac OS) iPF780User's GuideEnhanced Printing Options Printing at full size76
