Depression on the leading edge is leftDepression on the leading edge is leftCause Corrective ActionKeeping a roll in the printer for a long timewithout printing on it may leave a depres-sion on the leading edge.When printing quality is most important, we recommend setting TrimEdge Reload toOn or Automatic so that the paper edge is automatically cut before printing.(See "Menu Structure.") ➔ P.408The size of clear film cannot be detectedThe size of clear film cannot be detectedCause Corrective ActionThe Platen is soiled with ink or other substances. Open the Top Cover and clean the entire Platen.(See "Cleaning Inside the Top Cover.") ➔ P.514Roll Paper is Continuously EjectedRoll Paper is Continuously EjectedCause Corrective ActionAlthough sheets areselected as the papersource, a roll was ad-vanced.After roll ejection stops, follow these steps to reload the roll.1. Push the Release Lever back.2. Open the Roll Cover.3. Using both hands, rotate the Roll Holder toward the back to rewind the roll. At this time, ensure thatboth ends of the roll are rewound evenly.4. Pull the Release Lever forward.5. Load the roll. At this time, be sure to press the Load button and select "Load Roll Paper".(See "Loading Rolls in the Printer.") ➔ P.339iPF780 Depression on the leading edge is leftUser's GuideTroubleshooting Problems Regarding Paper535
