Casio AT-5 User Manual

Also see for AT-3: Guidelines

Contents

Casio AT-5 User Manual Manual pdf 117 page image

Using the Pattern SequencerE-1151. While the pattern sequencer screen isdisplayed, hold down the R-13 (FUNCTION)button and press the C-4 (EDIT) button todisplay the edit menu.2. Use the R-17 (t, y) buttons to move the 0 to“ElementEdit” and then press the R-16 (ENTER)button.• This displays the “ElementEdit” screen.3. The 0 should be next to “Clear”, so press theR-16 (ENTER) button.• This displays the “Clear Element” screen.4. Use the R-17 (u, i) buttons to specify theaccompaniment pattern you want to clear andthen press the R-16 (ENTER) button.5. In response to the “Sure?” message thatappears, press the R-14 (YES) button to clear orthe R-14 (NO) button to cancel.• Pressing the R-14 (YES) button changes the status ofall the instrument parts of the accompaniment patternyou specified in step 4 to “Empty”.• This procedure can be performed only when the statusof all of the instrument parts of the accompanimentpattern is “Empty”.1. While the pattern sequencer screen isdisplayed, hold down the R-13 (FUNCTION)button and press the C-4 (EDIT) button todisplay the edit menu.2. Use the R-17 (t, y) buttons to move the 0 to“ElementEdit” and then press the R-16 (ENTER)button.• This displays the “ElementEdit” screen.3. Use the R-17 (t, y) buttons to select one ofthe items described in the table below and thenuse the dial or R-14 (–, +) buttons to change thesetting.4. After the settings are the way you want, pressthe R-15 (EXIT) button twice to return to thepattern sequencer screen.1. While the pattern sequencer screen isdisplayed, hold down the R-13 (FUNCTION)button and press the C-4 (EDIT) button todisplay the edit menu.2. Use the R-17 (t, y) buttons to move the 0 to“AllEdit” and then press the R-16 (ENTER)button.• This displays the “All Edit” screen.3. The 0 should be next to “Clear”, so press theR-16 (ENTER) button.4. In response to the “Sure?” message thatappears, press the R-14 (YES) button to clear orthe R-14 (NO) button to cancel.• Pressing the R-14 (YES) button changes the status ofall the instrument parts of all the accompanimentpatterns to “Empty”.Accompaniment Pattern andRhythm OperationsTo clear all instrument part rec areasincluded in an accompaniment patternTo configure the accompaniment patternnumber of measure and beat settingsDisplay: Item name Setting RangeMeasure:Number of measuresINTRO, ENDING:01 to 16NORMAL, VARIATION:01 to 16NORMAL FILL-IN, VARIATIONFILL-IN:01 to 02Beat: Beat 2/4 to 4/4 to 8/4, 2/8 to 16/8To clear all rec areas included in thecurrently selected rhythm