Applying Effects to a SoundE-33Effects are divided among different types (reverb, chorus,DSP), so first you need to use the procedure below to selectan effect type.1. While holding down the R-13 (FUNCTION)button, press the C-7 (EFFECT) button.• This displays the effect setting screen shown below.2. Use the dial or R-14 (–, +) buttons to select thereverb type you want to use.• Refer to the separate “Appendix” for information aboutsupported reverb types.• To turn off reverb, select “oFF” here.3. Press the C-7 (EFFECT) button or the R-15(EXIT) button.• This exits the effect setting screen.• A pointer indicator is displayed next to REVERB whenanything other than “oFF” is selected for the reverb type.The pointer indicator is not displayed next to REVERBwhen “oFF” is selected.• You can use Reverb Send to adjust how reverb is appliedto the tone of each keyboard or Auto Accompaniment part.For details, see “Using the Mixer” (page E-38).1. While holding down the R-13 (FUNCTION)button, press the C-7 (EFFECT) button todisplay the effect setting screen.R-15R-15R-16R-16R-14R-14C-7C-7 R-13R-13R-17R-17Selecting an EffectTo add reverb to soundsTo add the chorus effect to sounds
