E-125Using the Function MenuThe function menu contains items for tuning and touchadjustments, local on/off, and other global settings that needto be changed by you relatively infrequently. It also includessome memory card operations (format, etc.).This section explains function menu operations. For detailsabout specific function menu items, see “Function MenuSettings” (page E-126).1. Press the R-13 (FUNCTION) button.• This displays the function menu like the one shownbelow.2. To adjust the “Tune” (Tuning) setting, use thedial or the R-14 (–, +) buttons to change thevalue inside the thick brackets (%).• Pressing the R-14 (–, +) buttons at the same timereturns the setting to its initial default.• Changing the tuning value does not affect audioplayback (page E-121).3. The setting items from “Performance” andbelow are groups that include multiple settingitems. Use the following procedure to changethe settings of the items in each group.R-15R-15R-16R-16R-14R-14R-13R-13R-17R-17C-17C-17 R-18R-18Using the Function MenuTo change the setting of a function menuitem(1) Use the R-17 (t, y) buttons to move the 0 to thedesired group name and then press the R-16 (ENTER)button.• This displays the items included within the group.(2) Use the R-17 (t, y, u, i) buttons to move the 0to the setting you want to change.(3) Use the dial or the R-14 (–, +) buttons to change thesetting value.• Pressing the R-14 (–, +) buttons at the same timereturns an item to its initial default setting.(4) To return to the function menu, press the R-15 (EXIT)button.Example: Performance group
