Casio AT-5 User Manual

Also see for AT-3: Guidelines

Contents

Casio AT-5 User Manual Manual pdf 13 page image

E-11ConnectionsUsing headphones cuts off output from the built-in speakers,which means you can practice playing even late at nightwithout disturbing others.• Be sure to turn down the volume level before connectingheadphones.• Headphones do not come with the Digital Keyboard.• Use commercially available headphones.• Do not listen to very high volume output overheadphones for long periods. Doing so creates the riskof hearing damage.• If you are using headphones that require an adaptorplug, make sure you do not leave the adaptor pluggedin when removing the headphones.Connecting an optionally available pedal let’s you performpedal operations that add more versatility to your keyboardplay. For information about the types of effects that can beapplied by pressing the pedal, see “Ped.Assign (PedalAssign)” (page E-126).You can connect audio equipment or a music amplifier to theDigital Keyboard and then play through external speakers formore powerful volume and better sound quality.• Whenever connecting a device to the Digital Keyboard,first use the L-2 (MAIN VOLUME) knob to set thevolume to a low level. After connecting, you can adjustthe volume to the level you want.• Whenever you connect any device to the DigitalKeyboard, be sure to read the user documentation thatcomes with the device.Use commercially available connecting cords to connect theexternal audio equipment to the Digital Keyboard’s T-9 (LINEOUT) jacks as shown in Figure 1. LINE OUT R jack output isright channel sound, while LINE OUT L/MONO jack output isleft channel sound. It is up to you to purchase connectingcords like the ones shown in the illustration for connection ofaudio equipment. Normally in this configuration you must setthe audio equipment’s input selector to the setting thatspecifies the terminal (such as AUX IN) to which the DigitalKeyboard is connected. Use the L-2 (MAIN VOLUME) knobto adjust the volume level.Use a commercially available connecting cord to connect theamplifier to either of the Digital Keyboard’s T-9 (LINE OUT)jacks as shown in Figure 2. LINE OUT R jack output is rightchannel sound, while LINE OUT L/MONO jack output is leftchannel sound. Connecting to the LINE OUT L/ MONO jackonly outputs a mixture of both channels. It is up to you topurchase a connecting cord like the one shown in theillustration for connection of the amplifier. Use the L-2 (MAINVOLUME) knob to adjust the volume level.Connecting HeadphonesConnecting a PedalT-4 (PHONES) jackT-3 (SUSTAIN/ASSIGNABLE JACK)Outputting Digital KeyboardSound to Audio Equipment or anAmplifierOutputting Keyboard Notes to AudioEquipment 1Outputting Keyboard Notes to a MusicalInstrument Amplifier 2INPUT 1INPUT 2Audio amplifier AUX IN jack, etc.Pin plugLEFT (White)Standard plugGuitar amplifierKeyboard amplifier, etc.RIGHT (Red)