Casio AT-5 User Manual

Also see for AT-3: Guidelines

Contents

Casio AT-5 User Manual Manual pdf 55 page image

Music PresetsE-53Preset areas numbered F:001 through F:050 are for storageof user presets. You can have up to 50 user presets stored inmemory at one time. You can recall a stored user preset afterpressing the L-9 ([F] USER RHYTHMS) button. See “Toperform using a music preset” (page E-49) for moreinformation.1. Perform steps 1 through 4 under “To performusing a music preset” (page E-49) and selectthe music preset you want to edit in order tocreate your user music preset.2. Configure tone and other settings referring to“Music Preset Settings” (page E-51).3. While holding down the R-13 (FUNCTION)button, press the C-17 (MENU) button.• This displays the MP (music preset) editor screen likethe one shown below.• Pressing the R-16 (ENTER) button here will change toa screen for editing the chord progression. See “Editinga Chord Progression” (page E-57) for more information.4. Use the R-17 (t, y) buttons to move the 0 to“Parameter” and then press the R-16 (ENTER)button.• This displays the parameter menu.5. You can change each of the parameters on theparameter menu as required.Creating a User PresetUser Preset NumbersTo create and save a user preset(1) Use the R-17 (t, y, u, i) buttons to move the 0to the parameter you want to change.(2) Use the dial or the R-14 (–, +) buttons to change thesetting value.• Pressing the R-14 (–, +) buttons at the same timereturns a parameter to its initial default setting.• The following explains the meanings and settingranges of the on-screen items. The settings markedwith an asterisk (*) in the “Setting Range” columnare initial defaults.Item name Description SettingRangeSynchro(Synchro type)Specifies the AutoAccompaniment synchrostart standby type.oFF, Normal*,Variation,IntroIntroChd(Intro chord)Specifies the chords of theAuto Accompaniment intropattern.C* - B,Cm - BmEndingChd(Ending chord)Specifies the chords of theAuto Accompanimentending pattern.C* - B,Cm - BmAutoFill(Auto fill in)Specifies whether a fill inshould be inserted (on) ornot inserted (oFF) at theend of the chordprogression.on*, oFFTiming(Timing set)Specifies the chord changetiming during playback forrecorded chords. Forinformation aboutdifferences in playback foreach setting value, see“Timing Setting and ChordProgression Playback”(page E-55).Normal*, Half,Double, 3/4,3/2(3) Repeat steps (1) and (2) as required.(4) After the settings are the way you want, press the R-15(EXIT) button.• This returns to the MP editor screen.