Using the Song SequencerE-767. To stop playback, press the L-17 (START/STOP)button.• Pressing the R-15 (EXIT) button without pressing the R-16(ENTER) button in step 4 above will cancel the phrasesetting operation and close the locator screen.• The start point and end point specified on the locatorscreen by the above operation will be displayed as theinitial default values when you display the screen of editingthe next event.– “To delete all events in a specific range of a track” (pageE-88)– “To copy the events within a specific range to a desiredlocation” (page E-89)– “To quantize all note events within specific range of atrack” (page E-91)– “To delete all pitch bender events within a specific rangeof a track” (page E-92)This lets you repeat play and check the phrase so you canperform the above operation to edit it.The following operations are supported during song editing.• Deleting a specific song or all songs• Copying a song from one area to another• Deleting specific measures from a song• Inserting blank measures into a song• Extracting system track recorded content to track 04through 07 or 09 through 16• Renaming songs1. Press the C-5 (SONG SEQUENCER) button toenter the song sequencer mode.2. While holding down the R-13 (FUNCTION)button, press the C-5 (EDIT) button to displaythe edit menu.3. Use the R-17 (y) button to move the 0 to“Song Edit” and then press the R-16 (ENTER)button.• This displays the song editor menu shown below.Editing a SongTo start a song editor operation
