– Port Number : Enter the default port number from 1 to 65535. 445is set as adefault value.• Standard port number for SMB over NetBIOS is 139.• Standard port number SMB over TCPIP direct is 445.– Make to Default Server : Select to make it a default server.• Additional Information– Backup Server : Enter the backup server.– Port Number : Enter the backup port number from 1 to 65535. 445is set as adefault value.4 Click Apply.Deleting a SMB server1 From the Embedded Web Service, select the Security tab Network SecurityExternal Authentication Server SMB Server.2 From the SMB server list, check the server(s) you want to delete.3 Click the Delete button.4 A confirmation message appears, click Yes.Editing a SMB server1 From the Embedded Web Service, select the Security tab Network SecurityExternal Authentication Server SMB Server.2 From the SMB server list, check the server(s) you want to edit and click Edit.A pop-up window appears.3 Change the necessary information.4 Click Apply.Testing a SMB server1 From the Embedded Web Service, select the Security tab Network SecurityExternal Authentication Server SMB Server.2 From the SMB server list, check the server you want to test.NOTE: The server to be tested should be selected from the list of servers that wereadded by using the adding a server feature.3 Click the Test button.LDAP ServerYou can set LDAP server settings.Adding a LDAP server1 From the Embedded Web Service, select the Security tab Network SecurityExternal Authentication Server LDAP Server.- 121