Option DescriptionJunk Fax Setup Using the Junk Fax Setup feature, the system will not accept faxessent from remote stations. Their numbers are stored in thememory as junk fax numbers. This feature is useful for blockingany unwanted faxes.Select Off to turn the feature off. Anybody can send you a fax.Select On to turn the feature on. You can set up to 10 fax numbersas junk fax numbers. After storing the numbers, you do not receiveany faxes from the registered stations.Secure Receive You can keep your received faxes from being accessed byunauthorized people.For further details about setting this mode, see "Using the SecureReceiving Mode (Administrator only)".Prefix Dial You can set a prefix dial number of up to five digits. This numberdials before any auto dial number is started. It is useful foraccessing the PABX exchange.Stamp ReceivedNameThis option allows the printer to automatically print the pagenumber, and the date and time of the reception at the bottom ofeach page of a received document.Select Off to turn this feature off.Select On to turn this feature on.ECM Mode The Error Correction Mode helps with poor line quality andensures that faxes are sent smoothly to any other ECM-equippedfax machine. If the line quality is poor, it takes more time to send afax when you are using the ECM mode.Select Off to turn this feature off.Select On to turn this feature on.Modem Speed Select the maximum modem speed you want if the phone line failsto sustain a higher modem speed. You can select 33.6, 28.8, 14.4,12.0, 9.6, or 4.8 kbps.Ring to Answer Specifies the number of times the machine rings before answeringan incoming call.Receive Mode Selects the default fax receiving mode.Redial Delay Sets the time interval before automatic redialling.Redial Attempt Sets the number of redial attempts. If you enter 0, the machine willnot redial.MSG Confirm Sets the machine to print a report whether a fax transmission wassuccessfully completed or not.- 264
