9 When the wireless network settings are completed, disconnect the USB cablebetween the computer and machine. Click Next.NOTE: If the Change PC Network Setting window appears, follow the steps inthe window.Click Next if you are finished with the computer’s wireless network settings.If you set the computer’s wireless network on DHCP, it will take several minutes toreceive the IP address.10 The Wireless Network Setting Complete window appears. To print from a Wi-Fi Directsupported mobile device, set the Wi-Fi Direct Option.NOTE: Wi-Fi Direct Option:– Wi-Fi Direct option appears on the screen only if your printer supports this feature.– Can start to build Wi-Fi Direct by using Dell Printer Manager– Network Name(SSID): The default Network Name is the model name and themaximum length is 22 characters (not including "Direct-xx-").– Network Key is the numeric string, and the size is 8 ~ 64 characters.11 Click Next when the Confirm Printer Connection window appears.12 Click Finish.Using a network cableYour machine is a network compatible machine. To enable your machine to work with yournetwork, you will need to perform some configuration procedures.NOTE: After completing the wireless network connection, you need to install amachine driver to print from an application. See "Wireless network setup (DellB2375dfw only)".See your network administrator, or the person that set up your wirelessnetwork, for information about your network configuration.• Items to prepare– Access point– Network-connected computer– Software CD that was provided with your machine– A machine installed with a wireless network interface– Network cablePrinting a network configuration reportYou can identify the network settings of your machine by printing a network configurationreport.See "Printing a network configuration report"- 235
