6 Click Next.7 The software searches the wireless network.NOTE: If the search has failed, you may check if the USB cable is properlyconnected between the computer and machine, and follow the instructionson the window.8 After searching, the window shows the wireless network devices. Select the name(SSID) of the access point you are using and click Next.NOTE: If you cannot find the network name you want to choose, or if youwant to set the wireless configuration manually, click Advanced Setting.– Enter the wireless Network Name: Enter the SSID of access point you want (SSIDis case-sensitive).– Operation Mode: Select Infrastructure.– Authentication: Select an authentication type.Open System: Authentication is not used, and encryption may or may not beused, depending on the need for data security.Shared Key: Authentication is used. A device that has a proper WEP key canaccess the network.WPA Personal or WPA2 Personal: Select this option to authenticate the printserver based on WPA Pre-Shared Key. This uses a shared secret key (generallycalled Pre- Shared Key pass phrase) which is manually configured on the accesspoint and each of its clients.– Encryption: Select the encryption (None, WEP64, WEP128, TKIP, AES, TKIP AES).– Network Key: Enter the encryption network key value.- 229
