Making CopiesNOTE: A computer connection is not required for copying.NOTE: Contaminating on the document glass may cause black spots on theprintout. For best results, clean the document glass before use. See "Cleaning thescanner".1 Load the document(s) face up with the top edge in first into the DADF.ORPlace a single document face down on the document glass.For details about loading a document, see "Loading an Original Document".2 Customize the copy settings including the number of copies, copy size, the darkness,and the image quality by using the operator panel. See "Using Copy and SettingOptions".3 Press Start ( ) on screen to begin copying.NOTE: You can cancel the copy job at any time. Press ( ) on screen, andthe copying will stop.Using Copy and Setting OptionsThe Copy menus on the operator panel let you customize all the basic copy options;number of copies, duplex, zoom, darkness, original size, original type, tray, layout, collation,stamp and watermark. Set the following options for the current copy job before pressingStart ( ) to make copies.Number of CopiesYou can select the number of copies from 1 to 199.1 Press Copy from the home screen.2 Press the left/right arrows to find Number of Copies.3 Press the -/+ buttons to select the number of copies you want.4 Press Start ( ) on screen to begin copying.NOTE: You can cancel the copy job at any time. Press ( ) on screen, andthe copying will stop.- 187
