CAUTION: The fuser area inside of the rear door of your printer becomes very hotwhen in use. Take care when you access this area.Loading Print Media in the Paper TrayYou can load approximately 250 sheets of plain paper in the tray 1 or the optional tray 2. Ifyou purchased the optional tray 2, see "Installing an Optional Tray 2" for installinginstructions. For faxing, you can use A4, letter or legal paper only. For copying or printing,you can use many different types and sizes of paper; see "Identifying Print Media Sourcesand Specifications".Follow these instructions to load print media into the tray 1 or optional tray 2. These traysare loaded the same way.1 Pull open the paper tray and load paper with the print side face down.You can load letterhead paper with the design side face down. The top edge of thesheet with the logo should be placed at the front side of the tray.For details about loading paper in the paper tray, see "Loading Paper".NOTE: If you experience problems with paper feed, place the paper in the MPF.NOTE: You can load previously printed paper. The printed side should be facing upwith an uncurled edge at the front. If you experience problems with paper feed,turn the paper around. Note that the print quality is not guaranteed.- 144