DuplexYou can set the printer to print copies on both sides of paper.1 Load the documents to be copied in the DADF.For details about loading a document, see "Loading an Original Document".2 Press Copy from the home screen3 Press the left/right arrows to select Duplex.4 Select the binding option you want.• 1->1 side: Prints in normal mode.• 1->2 Side Long Edge: Prints pages to be read like a book.• 1->2 Side Short Edge: Prints pages to be read by flipping through it like a notepad.• 2->1 Side Long Edge: Scans both sides of the originals and prints each of them ona separate sheet.• 2->1 Side Short Edge: Scans both sides of the originals and prints each one on aseparate sheet, but the information on the back side of the printout is rotate 180°.• 2->2 Side Long Edge: Scans both sides of the original and prints on both sides ofthe paper. This function produces exactly the same print out from the originals.Press Start ( ) on screen to begin copying.ZoomYou can reduce or enlarge the size of a copied image, from 25 percent to 400 percent,when you copy original documents from the document glass or the DADF.NOTE: When you make a reduced copy, black lines may appear at the bottom ofyour copy.To select from the predefined copy sizes:1 Press Copy from the home screen.2 Press the left/right arrows to select Zoom.3 Press the left/right arrows to select the zoom rate you want.4 You can select from Auto Fit, 25~400%.NOTE: If a document is detected in the DADF, the Auto Fit does not work.DarknessAdjust the darkness to make the copy lighter or darker than the original.1 Press Copy from the home screen2 Press the left/right arrows to find Darkness.3 Press the -/+ buttons to select level(-5 ~ 5) you want.4 Press Start ( ) on screen to begin copying.- 188
