FcoeAcl : 0 0ipv4pbr : 0 0vrfv4Acl : 0 0Openflow : 0 0fedgovacl : 0 0nlbclusteracl: 0 0Dell#Example of Viewing CAM-ACL SettingsNOTE: If you change the cam-acl setting from CONFIGURATION mode, the output of this command does not reflect anychanges until you save the running-configuration and reload the chassis.Dell#show cam-acl-- Chassis Cam ACL --Current Settings(in block sizes)1 block = 256 entriesL2Acl : 2Ipv4Acl : 2Ipv6Acl : 0Ipv4Qos : 2L2Qos : 2L2PT : 0IpMacAcl : 1VmanQos : 0EtsAcl : 0FcoeAcl : 0ipv4pbr : 0vrfv4Acl : 0Openflow : 0fedgovacl : 0nlbclusteracl: 0-- stack-unit 1 --Current Settings(in block sizes)1 block = 256 entriesL2Acl : 2Ipv4Acl : 2Ipv6Acl : 0Ipv4Qos : 2L2Qos : 2L2PT : 0IpMacAcl : 1VmanQos : 0EtsAcl : 0FcoeAcl : 0ipv4pbr : 0vrfv4Acl : 0Openflow : 0fedgovacl : 0nlbclusteracl: 0View CAM UsageView the amount of CAM space available, used, and remaining in each ACL partition using the show cam-usage command from EXECPrivilege mode.Example of the show cam-usage CommandDell#show cam-usageStackunit|Portpipe|Pipeline| CAM Partition | Total CAM | Used CAM |Available CAM========|========|========|=================|=============|=============|==============1 | 0 | 0 | IN-L2 ACL | 256 | 0 | 256| | | IN-L3 ACL | 256 | 1 | 255| | | IN-L3 ECMP GRP | 2048 | 0 | 2048| | | IN-V6 ACL | 0 | 0 | 0| | | IN-NLB ACL | 0 | 0 | 0| | | IPMAC ACL | 256 | 0 | 256| | | OUT-L2 ACL | 206 | 12 | 194224 Content Addressable Memory (CAM)
