MIB Support to Display the Available Memory Size onFlashDell Networking provides more MIB objects to display the available memory size on flash memory. The following table lists the MIB objectthat contains the available memory size on flash memory.Table 81. MIB Objects for Displaying the Available Memory Size on Flash via SNMPMIB Object OID DescriptionchStackUnitFlashUsageUtil Contains flash memory usage in percentage.The chStackUnitUtilTable MIB table contains the chStackUnitFlashUsageUtil MIB object which contains the flash memory usage percent.The chStackUnitUtilTable is located in MIB.Viewing the Available Flash Memory Size• To view the available flash memory using SNMP, use the following command.snmpget -v2c -c public 192.168.60.120 .1.3.6.1.4.1.6027.3.10.1.2.9.1.6.1enterprises.6027.3.10.1.2.9.1.5.1 = Gauge32: 24The output above displays that 24% of the flash memory is used.MIB Support to Display the Software Core FilesGenerated by the SystemDell Networking provides MIB objects to display the software core files generated by the system. The chSysSwCoresTable contains the listof software core files generated by the system. The following table lists the related MIB objects.Table 82. MIB Objects for Displaying the Software Core Files Generated by the SystemMIB Object OID DescriptionchSysSwCoresTable This is the table that contains the list ofsoftware core files generated by the system.chSysCoresEntry Entry number.chSysCoresInstance Stores the indexed information about theavailable software core files.chSysCoresFileName Contains the core file names and the filepaths.chSysCoresTimeCreated Contains the time at which core files arecreated.chSysCoresStackUnitNumber Contains information that includes whichstack unit or processor the core file wasoriginated from.Simple Network Management Protocol (SNMP) 801
