Example of Using a Macro to Change the Interface Range Configuration ModeThe following example shows how to change to the interface-range configuration mode using the interface-range macro named “test.”Dell(config)# interface range macro testDell(config-if)#Monitoring and Maintaining InterfacesMonitor interface statistics with the monitor interface command. This command displays an ongoing list of the interface status (up/down), number of packets, traffic statistics, and so on.To view the interface’s statistics, use the following command.• View the interface’s statistics.EXEC Privilege modeEnter the type of interface and the interface information:• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then the stack/slot/port/subport information.• For a 25-Gigabit Ethernet interface, enter the keyword twentyFiveGigE then the stack/slot/port/subport information.• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the stack/slot/port[/subport] information.• For a 50-Gigabit Ethernet interface, enter the keyword fiftyGigE then the stack/slot/port/subport information.• For a 100-Gigabit Ethernet interface, enter the keyword hundredGigE then the stack/slot/port information.Example of the monitor interface CommandThe information displays in a continuous run, refreshing every 2 seconds by default. To manage the output, use the following keys.• m — Change mode• l — Page up• T — Increase refresh interval (by 1 second)• t — Decrease refresh interval (by 1 second)• c — Clear screen• a — Page down• q — QuitDell#monitor interface Te 1/1/1/1Dell uptime is 1 day(s), 4 hour(s), 31 minute(s)Monitor time: 00:00:00 Refresh Intvl.: 2sInterface: Te 1/1/1/1, Disabled, Link is Down, Linespeed is 1000 MbitTraffic statistics: Current Rate DeltaInput bytes: 0 0 Bps 0Output bytes: 0 0 Bps 0Input packets: 0 0 pps 0Output packets: 0 0 pps 064B packets: 0 0 pps 0Over 64B packets: 0 0 pps 0Over 127B packets: 0 0 pps 0Over 255B packets: 0 0 pps 0Over 511B packets: 0 0 pps 0Over 1023B packets: 0 0 pps 0Error statistics:Input underruns: 0 0 pps 0Input giants: 0 0 pps 0Input throttles: 0 0 pps 0Input CRC: 0 0 pps 0Input IP checksum: 0 0 pps 0Input overrun: 0 0 pps 0Output underruns: 0 0 pps 0Output throttles: 0 0 pps 0378 Interfaces
