The following example shows an R3 configuration for MSDP with Anycast RP.ip multicast-routing!interface TenGigabitEthernet 1/1/4/1ip pim sparse-modeip address 10.11.0.32/24no shutdowninterface TenGigabitEthernet 1/1/5/1ip pim sparse-modeip address 10.11.6.34/24no shutdown!interface Loopback 0ip pim sparse-modeip address 192.168.0.3/32no shutdown!router ospf 1network 10.11.6.0/24 area 0network 192.168.0.3/32 area 0redistribute staticredistribute connectedredistribute bgp 200!router bgp 200redistribute ospf 1neighbor 192.168.0.22 remote-as 100neighbor 192.168.0.22 ebgp-multihop 255neighbor 192.168.0.22 update-source Loopback 0neighbor 192.168.0.22 no shutdown!ip multicast-msdpip msdp peer 192.168.0.11 connect-source Loopback 0ip msdp peer 192.168.0.22 connect-source Loopback 0ip msdp sa-filter out 192.168.0.22!ip route 192.168.0.1/32 10.11.0.23ip route 192.168.0.22/32 10.11.0.23!ip pim rp-address 192.168.0.3 group-address 224.0.0.0/4MSDP Sample ConfigurationsThe following examples show the running-configurations described in this chapter.For more information, see the illustrations in the Related Configuration Tasks section.MSDP Sample Configuration: R1 Running-Configip multicast-routing!interface TenGigabitEthernet 1/1/1/1ip pim sparse-modeip address 10.11.3.1/24no shutdown!interface TenGigabitEthernet 1/1/2/1ip address 10.11.2.1/24no shutdown!interface TenGigabitEthernet 1/1/3/1ip pim sparse-modeip address 10.11.1.12/24no shutdown!536 Multicast Source Discovery Protocol (MSDP)
