The following example shows reading the value of the next managed object.> snmpgetnext -v 2c -c mycommunity 10.11.131.161 .1.3.6.1.2.1.1.3.0SNMPv2-MIB::sysContact.0 = STRING:> snmpgetnext -v 2c -c mycommunity 10.11.131.161 sysContact.0The following example shows reading the value of the many managed objects at one time.> snmpwalk -v 2c -c mycommunity 10.11.131.161 .1.3.6.1.2.1.1SNMPv2-MIB::sysDescr.0 = STRING: Dell Real Time Operating System SoftwareDell Operating System Version: 1.0Dell Application Software Version: E_MAIN4.9.4.0.0Copyright (c) 1999-2014 by DellBuild Time: Mon May 12 14:02:22 PDT 2008SNMPv2-MIB::sysObjectID.0 = OID: SNMPv2-SMI::enterprises.6027.1.3.1DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (32920954) 3 days, 19:26:49.54SNMPv2-MIB::sysContact.0 = STRING:Writing Managed Object ValuesYou may only alter (write) a managed object value if your management station is a member of the same community as the SNMP agent,and the object is writable.Use the following command to write or write-over the value of a managed object.• To write or write-over the value of a managed object.snmpset -v version -c community agent-ip {identifier.instance | descriptor.instance}syntaxvalueExample of Writing the Value of a Managed Object> snmpset -v 2c -c mycommunity 10.11.131.161 sysName.0 s "R5"SNMPv2-MIB::sysName.0 = STRING: R5Configuring Contact and Location Information usingSNMPYou may configure system contact and location information from the Dell Networking system or from the management station usingSNMP.To configure system contact and location information from the Dell Networking system and from the management station using SNMP, usethe following commands.• (From a Dell Networking system) Identify the system manager along with this person’s contact information (for example, an emailaddress or phone number).CONFIGURATION modesnmp-server contact textYou may use up to 55 characters.The default is None.• (From a Dell Networking system) Identify the physical location of the system (for example, San Jose, 350 Holger Way, 1st floor lab, rackA1-1).CONFIGURATION modesnmp-server location textYou may use up to 55 characters.The default is None.• (From a management station) Identify the system manager along with this person’s contact information (for example, an email addressor phone number).792 Simple Network Management Protocol (SNMP)
